Q: If I look at the bottom wishbones they appear to be slightly curved. I have not measured it. They just give the optical impression. Equal on both sides. Is this correct for S3 coupe?

A: The wishbones can be checked by measuring the distance from the center of the balljoint to the center of the hole through which the long bolts fixes it to the subframe. According to the official manual for S2 and 3 1.3 coup&eacutes the distance is 221.5+/-0.5 mm (top wishbone) and from 355.7 to 356.2 mm (bottom wishbone). - Andrea -