Parts and tools for Fulvia & Flavia

Designed and made by Florian Krenn

During my restoration of a LANCIA FULVIA coupe S1 - 1966 - I developed some tools and special spare parts. Maybe someone is interested in them!

RUBBER SPRING BLOCK

With this rubber spring block your car will never sit too low at the front. Original or reproduction parts get weak after some time because they are to high in relation to their diameter! The high/diameter relation from the rubber-part of my block is 0,75 (original part: 1,60)!!
rubber block

If you want to have a very high sitting car you can use distance plates (5 or 10 mm), which can be mounted between the rubber part and the connecting plate.

Price: 2.800,.- ATS (204,-- Euro) for one car (2 pieces)

TOOL FOR TRANSMISSION RING-NUT AND REAR RING-NUTS S1, S2 & S3

With these tools it is easy to open those special ring-nuts in a comfortable way!

Above two pictures: Transmission ring-nut- and picture

Above two pictures: rear ring-nut.

The tool consists of: (see picture below): 1 transmission hub (either for S1: 6 pins or for S2 & S3: 3 pins); 1 disc for the lever; 1 disc for the hub; 1 hub for the large rear ring-nut; 1 hub for the inner ring-nut (either for S1: 6 pins or for S2 & S3: 3 pins); 1 disc for the large hub; 1 lever; 1 wooden box

Price: 355,-- Euro

If you are interested in one of these spareparts or tools, please contakt me: krenn@ipu.co.at.

Back to Fulvia mainpage.